1 A review of Polyvinyl alcohol / Carboxiy methyl cellulose (PVA/CMC) composites for various applications https://jourcc.com/index.php/jourcc/article/view/jcc222 10.29252/jcc.2.2.2 20.1001.1.26765837.2020.2.3.2.2 1 Polyvinyl alcohol / Carboxiy methyl cellulose (PVA/CMC) ‎ composite based on the synergic relation between two polymer‎ which attract considerable and develop a new blend with enhanced properties. Moreover, PVA is a kind of versatile polymer and contains high mechanical applications‎. On the other hand, although CMC‎ possesses effective application due to its high biocompatibility and biodegradability‎, it shows weak mechanical properties. Therefore, this paper provides a review on the PVA/CMC‎ composites for high potential of them on ‎various properties‎ (e.g. drug delivery, food packaging, agriculture, electric and physiochemical properties). Finally, it was found that these novel composites can alternative source for producing biomaterials and drug delivery systems as well as hydrogel networks are constructed from these hydrophilic polymers for hydrophilic drugs or holding water‎ to deliver moisture to the wound site. Moreover these composite can provide controlled release fertilizer as effective application in agriculture. Thus, PVA/CMC‎ composites based materials have a wide applicability and nice potential in the development of physiochemical and electrical properties. 69 76 Hiva Nargesi khoramabadi Payame Noor University (PNU) Iran Hiva.nargesi@yahoo.com Mehrnoosh Arefian Falavarjan Branch, Islamic Azad University (IAU) Iran info@jourcc.com Mahsa Hojjati Shahrood University of Technology Iran info@jourcc.com Iman Tajzad Majlesi Branch, Islamic Azad University (IAU) Iran info@jourcc.com Ali Mokhtarzade Amirkabir University of Technology Iran info@jourcc.com Majid Mazhar Azarbaijan Shahid Madani University Iran info@jourcc.com Ata Jamavari Iran University of Science and Technology Iran info@jourcc.com PVA CMC Applications Composites Article2.pdf [1] L. Bazli, A. Khavandi, M.A. Boutorabi, M. Karrabi, Correlation between viscoelastic behavior and mor-phology of nanocomposites based on SR/EPDM blends compatibilized by maleic anhydride, Polymer 113 (2017) 156-166.##[2] L. Bazli, A. Khavandi, M.A. Boutorabi, M. Karrabi, Morphology and viscoelastic be-havior of silicone rubber/EPDM/Cloisite 15A nanocomposites based on Maxwell model, Iranian Polymer Journal 25(11) (2016) 907-918.##[3] X. Dang, H. Yuan, Z. Shan, An eco-friendly material based on graft co-polymer of gelatin extracted from leather solid waste for potential application in chemical sand-fixation, Journal of Cleaner Production 188 (2018) 416-424.##[4] X. Li, S. Cai, X. Hu, X. He, Thermosensitive self-assembled behavior of poly (acrylamide-co-acrylonitrile)/polystyrene triblock copolymer and application in drug loading, International Journal of Polymeric Materials and Polymeric Biomaterials (2020) 1-10.##[5] P. Li, Z. Luo, X. Li, R. Wang, H. Chen, Y. Zhao, J. Wang, N. Huang, Preparation, evaluation and functionaliza-tion of biomimetic block copolymer coatings for potential applications in cardiovascular implants, Applied Surface Science 502 (2020) 144085.##[6] Z. Wang, J. Li, Y. Liu, J. Luo, Synthesis and characterizations of zwitterionic copolymer hydrogels with excellent lubrication behavior, Tribology International 143 (2020) 106026.##[7] R. Liu, Y. Sun, H. Gu, X. Zhou, Synthesis and application of acrylate copolymer as high ink-absorption and fast drying coating agent for polyester fabric, Progress in Organic Coatings 136 (2019) 105298.##[8] C.G. Park, S.H. Park, Y. Kim, T.L. Nguyen, H.Y. Woo, H. Kang, H.J. Yoon, S. Park, M.J. Cho, D.H. Choi, Facile one-pot polymerization of a fully conjugated donor–acceptor block copolymer and its appli-cation in efficient single component polymer solar cells, Journal of Materials Chemistry A 7(37) (2019) 21280-21289.##[9] A.M. El Sayed, Synthesis and controlling the optical and dielectric properties of CMC/PVA blend via γ-rays irradiation, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 321 (2014) 41-48.##[10] L. Bazli, M.H. Bagherian, M. Karrabi, F. Abbassi‐Sourki, H. Azizi, Effect of starch ratio and compatibilization on the viscoelastic behavior of POE/starch blends, Journal of Applied Polymer Science 137(29) (2020) 48877.##[11] S. Rahimi, F. Sharifi-anJazi, A. Esmaeilkhanian, M. Moradi, A.H. Safi Samghabadi, Effect of SiO2 content on Y-TZP/Al2O3 ceram-ic-nanocomposite properties as potential dental applications, Ceramics International 46(8, Part A) (2020) 10910-10916.##[12] M. Alizadeh, M.H. Paydar, F. Sharifian Jazi, Structural evaluation and mechanical prop-erties of nanostructured Al/B4C composite fabricated by ARB process, Composites Part B: Engineering 44(1) (2013) 339-343.##[13] E. Sharifi Sedeh, S. Mirdamadi, F. Sharifianjazi, M. Tahriri, Synthesis and Evaluation of Mechanical and Biological Properties of Scaffold Prepared From Ti and Mg With Different Volume Per-cent, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry 45(7) (2015) 1087-1091.##[14] H. Ashrafi, M. Bazli, A. Vatani Oskouei, L. Bazli, Effect of Sequential Exposure to UV Radiation and Water Vapor Condensation and Extreme Temperatures on the Mechanical Properties of GFRP Bars, Jour-nal of Composites for Construction 22(1) (2018) 04017047.##[15] A.M. El Sayed, S. El-Gamal, W.M. Morsi, G. Mohammed, Effect of PVA and copper oxide nanoparticles on the structural, optical, and electrical proper-ties of carboxymethyl cellulose films, Journal of Materials Science 50(13) (2015) 4717-4728.##[16] C.C. Thong, D.C.L. Teo, C.K. Ng, Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior, Construction and Building Materials 107 (2016) 172-180.##[17] A. Nawaz, I.A. Hümmelgen, Poly(vinyl alcohol) gate dielectric in organic field-effect transistors, Journal of Materials Science: Materials in Electronics 30(6) (2019) 5299-5326.##[18] M. Said, A.A. Abd El-Azim, M.M. Ali, H. El-Ghazaly, I. Shaaban, Effect of elevated temperature on axially and eccen-trically loaded columns containing Polyvinyl Alcohol (PVA) fibers, Engineering Structures 204 (2020) 110065.##[19] A. Krainiukov, J. Liu, E. Kravchenko, D. Chang, Performance of silty sand reinforced with aqueous solution of polyvinyl alcohol subjected to freeze-thaw cycles, Cold Regions Science and Technology 174 (2020) 103054.##[20] S. Xu, M.A. Malik, Z. Qi, B. Huang, Q. Li, M. Sarkar, Influence of the PVA fibers and SiO2 NPs on the structural properties of fly ash based sustainable geopolymer, Construction and Building Materials 164 (2018) 238-245.##[21] Y. Tang, D. Zhou, J. Zhang, Novel polyvinyl alcohol/styrene butadiene rubber latex/carboxymethyl cellulose nanocomposites reinforced with modified halloysite nanotubes, Journal of Nanomaterials 2013 (2013).##[22] X. Tong, J. Huang, J. Mei, J. Ge, L. Han, G. Huang, Characterization of Controlled Release Fertilizer by Infrared Microspectroscopy, Analytical Letters 51(14) (2018) 2252-2270.##[23] L. Yi, Y. Zhang, X. Shi, X. Du, X. Wang, A. Yu, G. Zhai, Recent progress of functionalised gra-phene oxide in cancer therapy, Journal of Drug Targeting 27(2) (2019) 125-144.##[24] O.M. Abdallah, K.Z. El-Baghdady, M.M.H. Khalil, M.I. El Borhamy, G.A. Meligi, Antibacterial, antibiofilm and cytotoxic activi-ties of biogenic polyvinyl alcohol-silver and chitosan-silver nanocomposites, Journal of Polymer Research 27(3) (2020) 74.##[25] W. Ma, T. Li, Q. Zhang, J. Zhong, H. Matsuyama, Preparation of hybrid membranes by incorporating hydrophilic UiO-66 nanoparticles for high-performance pervaporation dehydration of aprotic solvents, Journal of Nanoparticle Research 22(3) (2020) 64.##[26] Y. Yang, Y. Zhao, J. Liu, Z. Nie, J. Ma, M. Hua, Y. Zhang, X. Cai, X. He, Flexible and Transparent High-Dielectric-Constant Polymer Films Based on Molecular Ferroelectric-Modified Poly(Vinyl Alcohol), ACS Materials Letters (2020) 453-460.##[27] Y. Xie, X. Lin, H. Li, T. Ji, Effect of polyvinyl alcohol powder on the bonding mechanism of a new magnesium phos-phate cement mortar, Construction and Building Materials 239 (2020) 117871.##[28] Reena, A. Kumar, V. Mahto, A.K. Choubey, Synthesis and characterization of cross-linked hydrogels using polyvinyl alcohol and polyvinyl pyrrolidone and their blend for water shut-off treatments, Journal of Molecular Liquids 301 (2020) 112472.##[29] M. Hashmi, S. Ullah, I.S. Kim, Electrospun Momordica Charantia Incorporated Polyvinyl Al-cohol (PVA) Nanofibers for Antibacterial Applications, Materials Today Communications (2020) 101161.##[30] S. Liu, L. Wang, X. Wang, L. Liu, A. Zhou, X. Cao, Preparation, mechanical and thermal char-acteristics of d-Ti3C2/PVA film, Materials Today Communications 22 (2020) 100799.##[31] E. Yan, J. Jiang, X. Yang, L. Fan, Y. Wang, Q. An, Z. Zhang, B. Lu, D. Wang, D. Zhang, pH-sensitive core-shell electrospun nanofibers based on polyvinyl alcohol/polycaprolactone as a potential drug delivery system for the chemo-therapy against cervical cancer, Journal of Drug Delivery Science and Technology 55 (2020) 101455.##[32] A. Kumar, H. Kaur, Sprayed in-situ synthesis of polyvinyl alcohol/chitosan loaded silver nanocomposite hy-drogel for improved antibacterial effects, International Journal of Biological Macromolecules 145 (2020) 950-964.##[33] R. Ahmed, A. Ibrahim, E. El-Said, Enhancing the Optical Properties of Polyvinyl Alcohol by Blending It with Polyethylene Glycol, Acta Physica Polonica, A. 137(3) (2020).##[34] K. Prusty, S.K. Swain, Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials, Journal of Applied Polymer Science n/a(n/a) (2020) 49284.##[35] R.S. Rana, S. Rana, A. Nigrawal, B. kumar, A. kumar, Preparation and mechanical properties evaluation of polyvi-nyl alcohol and banana fibres composite, Materials Today: Proceedings (2020).##[36] B. Merz, C. Capello, G.C. Leandro, D.E. Moritz, A.R. Monteiro, G.A. Valencia, A novel colorimetric indicator film based on chi-tosan, polyvinyl alcohol and anthocyanins from jambolan (Syzygium cumini) fruit for monitoring shrimp freshness, International Journal of Biological Macromolecules 153 (2020) 625-632.##[37] M. Afshar, G. Dini, S. Vaezifar, M. Mehdikhani, B. Movahedi, Preparation and characterization of sodium alginate/polyvinyl al-cohol hydrogel containing drug-loaded chitosan nanoparticles as a drug delivery system, Journal of Drug De-livery Science and Technology 56 (2020) 101530.##[38] N. Hendrawati, K. Sa’diyah, E. Novika, A.A. Wi-bowo, The effect of polyvinyl alcohol (PVOH) addition on biodegradable foam production from sago starch, AIP Conference Proceedings 2197(1) (2020) 050008.##[39] L. Zhang, G. Zhang, J. Lu, H. Liang, Preparation and Characterization of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Film as a Potential Coating Mate-rial, Polymer-Plastics Technology and Engineering 52(2) (2013) 163-167.##[40] H. Zhang, J. Zhang, The preparation of novel polyvinyl alcohol (PVA)-based nanoparticle/carbon nanotubes (PNP/CNTs) aerogel for solvents adsorption application, Journal of Colloid and Interface Science 569 (2020) 254-266.##[41] O.F. Nwabor, S. Sudarshan, S. Paosen, K. Vongkamjan, S.P. Voravuthikunchai, Enhancing food shelf life with pol-yvinyl alcohol-chitosan polymer nanocomposite films from bioactive Eucalyptus leaf extracts, Food Biosci-ence (2020) 100609.##[42] F. Reguieg, L. Ricci, N. Bouyacoub, M. Belbachir, M. Bertoldo, Thermal charac-terization by DSC and TGA analyses of PVA hydrogels with organic and sodium MMT, Polymer Bulletin 77(2) (2020) 929-948.##[43] H.Q. Li, X.J. Liu, H. Wang, H. Yang, Z. Wang, J. He, Proton exchange mem-branes with cross-linked interpenetrating network of sulfonated polyvinyl alcohol and poly(2-acrylamido-2-methyl-1-propanesulfonic acid): Excellent relative selectivity, Journal of Membrane Science 595 (2020) 117511.##[44] B.H. Musa, N.J. Hameed, Study of the mechanical properties of polyvinyl alcohol/starch blends, Materials Today: Proceedings 20 (2020) 439-442.##[45] D.N. Iqbal, M. Tariq, S.M. Khan, N. Gull, S. Sagar Iqbal, A. Aziz, A. Nazir, M. Iqbal, Synthesis and characterization of chitosan and guar gum based ter-nary blends with polyvinyl alcohol, International Journal of Biological Macromolecules 143 (2020) 546-554.##[46] D. Nataraj, R. Reddy, N. Reddy, Crosslinking electrospun poly (vinyl) alcohol fibers with citric acid to impart aqueous stability for medical applications, European Polymer Journal 124 (2020) 109484.##[47] M.N. Pervez, G.K. Stylios, Y. Liang, F. Ouyang, Y. Cai, Low-temperature synthesis of novel polyvinylalcohol (PVA) nanofibrous membranes for catalytic dye degradation, Journal of Cleaner Production 262 (2020) 121301.##[48] M.H. El-Newehy, M.E. El-Naggar, S. Alotaiby, H. El-Hamshary, M. Moydeen, S. Al-Deyab, Preparation of biocompatible system based on electrospun CMC/PVA nanofibers as controlled re-lease carrier of diclofenac sodium, Journal of Macromolecular Science, Part A 53(9) (2016) 566-573.##[49] S.R. Muppalla, S.R. Kanatt, S.P. Chawla, A. Sharma, Carboxymethyl cellulose–polyvinyl alcohol films with clove oil for active packaging of ground chicken meat, Food Packaging and Shelf Life 2(2) (2014) 51-58.##[50] E.O.M. Osman, Synthesis and Improvement of Degree of Substitution and Characterization of Car-boxymethylcellulose from Cotton Fuzz, Sudan University of Science and Technology, 2016.##[51] A. Pet-tignano, A. Charlot, E. Fleury, Solvent-Free Synthesis of Amidated Carboxymethyl Cellulose Derivatives: Ef-fect on the Thermal Properties, Polymers 11(7) (2019).##[52] M.F.A. Taleb, H.L.A. El-Mohdy, H.A.A. El-Rehim, Radiation preparation of PVA/CMC copolymers and their application in removal of dyes, Journal of Hazardous Materials 168(1) (2009) 68-75.##[53] N.F. Mazuki, A.P.P. Abdul Majeed, Y. Nagao, A.S. Sam-sudin, Studies on ionics conduction properties of modification CMC-PVA based polymer blend electrolytes via impedance approach, Polymer Testing 81 (2020) 106234.##[54] M.M. Pérez-Madrigal, M.G. Edo, M.G. Saborío, F. Estrany, C. Alemán, Pastes and hydrogels from carboxymethyl cellulose sodium salt as supporting electrolyte of solid electrochemical supercapacitors, Carbohydrate Polymers 200 (2018) 456-467.##[55] D. Duquette, M.-J. Dumont, Comparative studies of chemical crosslinking reactions and applications of bio-based hydrogels, Polymer Bulletin 76(5) (2019) 2683-2710.##[56] K. Suppiah, P.L. Teh, S. Husseinsyah, R. Rahman, Properties and characterization of carboxymethyl cellulose/halloysite nanotube bio-nanocomposite films: Effect of sodium dodecyl sulfate, Polymer Bulletin 76(1) (2019) 365-386.##[57] Y. Zahedi, B. Fathi-Achachlouei, A.R. Yousefi, Physical and mechanical properties of hybrid montmorillonite/zinc oxide rein-forced carboxymethyl cellulose nanocomposites, International Journal of Biological Macromolecules 108 (2018) 863-873.##[58] D.G. Prajapati, B. Kandasubramanian, Biodegradable Polymeric Solid Framework-Based Organic Phase-Change Materials for Thermal Energy Storage, Industrial and Engineering Chemistry Research 58(25) (2019) 10652-10677.##[59] N. Hasirci, C. Kilic, A. Kömez, G. Bahcecioglu, V. Hasirci, Hy-drogels in Regenerative Medicine, Gels Handbook, WORLD SCIENTIFIC2016, pp. 1-52.##[60] K. Kozłowicz, S. Nazarewicz, D. Góral, A. Krawczuk, M. Domin, Lyophilized Protein Structures as an Alternative Biode-gradable Material for Food Packaging, Sustainability 11(24) (2019).##[61] J. Ampaiwong, P. Rattana-waleedirojn, K. Saengkiettiyut, N. Rodthongkum, P. Potiyaraj, N. Soatthiyanon, Reduced Graphene Ox-ide/Carboxymethyl Cellulose Nanocomposites: Novel Conductive Films, Journal of Nanoscience and Nano-technology 19(6) (2019) 3544-3550.##[62] C. Xiang, C. Wang, R. Guo, J. Lan, S. Lin, S. Jiang, X. Lai, Y. Zhang, H. Xiao, Synthesis of carboxymethyl cellulose-reduced graphene oxide aerogel for efficient removal of organic liquids and dyes, Journal of Materials Science 54(2) (2019) 1872-1883.##[63] S.C. Daminabo, S. Goel, S.A. Grammatikos, H.Y. Nezhad, V.K. Thakur, Fused deposition modeling-based additive manufactur-ing (3D printing): techniques for polymer material systems, Materials Today Chemistry 16 (2020) 100248.##[64] H. Dai, Y. Huang, H. Huang, Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydro-gels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue, Carbohydrate Polymers 185 (2018) 1-11.##[65] M.A. Saadiah, A.S. Samsudin, Electrical study on Carboxymethyl Cellu-lose-Polyvinyl alcohol based bio-polymer blend electrolytes, IOP Conference Series: Materials Science and Engineering 342 (2018) 012045.##[66] W.F. Su, Principles of Polymer Design and Synthesis, Springer Berlin Heidelberg2013.##[67] M.T. Taghizadeh, N. Sabouri, B. Ghanbarzadeh, Mechanochemical activation of car-boxy methyl cellulose and its thermoplastic polyvinyl alcohol/starch biocomposites with enhanced physico-chemical properties, International Journal of Biochemistry and Biophysics 1(1) (2013) 9-15.##[68] J. Miao, R. Zhang, R. Bai, Poly (vinyl alcohol)/carboxymethyl cellulose sodium blend composite nanofiltration mem-branes developed via interfacial polymerization, Journal of Membrane Science 493 (2015) 654-663.##[69] B. Tajeddin, N. Ramedani, Preparation and Characterization (Mechanical and Water Absorption Properties) of CMC/PVA/Clay Nanocomposite Films, Iranian Journal of Chemistry and Chemical Engineering (IJCCE) 35(3) (2016) 9-15.##[70] J. Zhu, Q. Li, Y. Che, X. Liu, C. Dong, X. Chen, C. Wang, Effect of Na2CO3 on the Microstructure and Macroscopic Properties and Mechanism Analysis of PVA/CMC Composite Film, Poly-mers 12(2) (2020) 453.##[71] A. Kazemzadeh, H. Kazemzadeh, L. Bazli, Determination of Hg2+ by Diphe-nylcarbazone Compound in Polymer Film, Composites and Compounds 1(1) (2019).##[72] L.-Y. Wang, M.-J. Wang, Removal of heavy metal ions by poly (vinyl alcohol) and carboxymethyl cellulose composite hydro-gels prepared by a freeze–thaw method, ACS Sustainable Chemistry and Engineering 4(5) (2016) 2830-2837.##[73] M.M. Abutalib, Effect of zinc oxide nanorods on the structural, thermal, dielectric and electrical properties of polyvinyl alcohol/carboxymethyle cellulose composites, Physica B: Condensed Matter 557 (2019) 108-116.##[74] A. Goswami, A.K. Bajpai, J. Bajpai, B.K. Sinha, Designing vanadium pentoxide-carboxymethyl cellulose/polyvinyl alcohol-based bionanocomposite films and study of their structure, topog-raphy, mechanical, electrical and optical behavior, Polymer Bulletin 75(2) (2018) 781-807.##[75] S.A. Oleyaei, H. Almasi, B. Ghanbarzadeh, A.A. Moayedi, Synergistic reinforcing effect of TiO2 and montmorillo-nite on potato starch nanocomposite films: Thermal, mechanical and barrier properties, Carbohydrate Poly-mers 152 (2016) 253-262.##[76] H. Fasihi, M. Fazilati, M. Hashemi, N. Noshirvani, Novel carboxymethyl cel-lulose-polyvinyl alcohol blend films stabilized by Pickering emulsion incorporation method, Carbohydrate Polymers 167 (2017) 79-89.##[77] D. Jeong, S.-W. Joo, Y. Hu, V.V. Shinde, E. Cho, S. Jung, Carboxymethyl cellulose-based superabsorbent hydrogels containing carboxymehtyl β-cyclodextrin for enhanced mechanical strength and effective drug delivery, European Polymer Journal 105 (2018) 17-25.##[78] S. Villarruel, L. Gi-annuzzi, S. Rivero, A. Pinotti, Changes induced by UV radiation in the presence of sodium benzoate in films formulated with polyvinyl alcohol and carboxymethyl cellulose, Materials Science and Engineering: C 56 (2015) 545-554.##[79] E. Asadi, A. Fassadi Chimeh, S. Hosseini, S. Rahimi, B. Sarkhosh, L. Bazli, R. Bashiri, A.H. Vakili Tahmorsati, A Review of Clinical Applications of Graphene Quantum Dot-based Composites, Composites and Compounds 1(1) (2019).##[80] M. Radmansouri, E. Bahmani, E. Sarikhani, K. Rahmani, F. Sharifianjazi, M. Irani, Doxorubicin hydrochloride-Loaded electrospun chitosan/cobalt ferrite/titanium oxide nanofibers for hyperthermic tumor cell treatment and controlled drug release, International journal of biologi-cal macromolecules 116 (2018) 378-384.##[81] M.S.N. Shahrbabak, F. Sharifianjazi, D. Rahban, A. Salimi, A comparative investigation on bioactivity and antibacterial properties of sol-gel derived 58S bioactive glass substituted by Ag and Zn, Silicon 11(6) (2019) 2741-2751.##[82] A. Moghanian, A. Ghorbanoghli, M. Kazem‐Rostami, A. Pazhouheshgar, E. Salari, M. Saghafi Yazdi, T. Alimardani, H. Jahani, F. Sharifian Jazi, M. Tahri-ri, Novel antibacterial Cu/Mg‐substituted 58S‐bioglass: Synthesis, characterization and investigation of in vitro bioactivity, International Journal of Applied Glass Science (2019).##[83] J. Daraei, Production and characterization of PCL (Polycaprolactone) coated TCP/nanoBG composite scaffolds by sponge foam method for orthopedic applications, Journal of Composites and Compounds 1(1) (2020).##[84] P. Abasian, M. Rad-mansouri, M.H. Jouybari, M.V. Ghasemi, A. Mohammadi, M. Irani, F.S. Jazi, Incorporation of magnetic NaX zeolite/DOX into the PLA/chitosan nanofibers for sustained release of doxorubicin against carcinoma cells death in vitro, International journal of biological macromolecules 121 (2019) 398-406.##[85] H. Won Jang, A. Zareidoost, M. Moradi, A. Abuchenari, A. Bakhtiari, R. Pouriamanesh, B. Malekpouri, A. Jafari Rad, Photo-sensitive nanocomposites: environmental and biological applications, Journal of Composites and Compounds 1(1) (2020).##[86] V.S. Ghorpade, R.J. Dias, K.K. Mali, S.I. Mulla, Citric acid crosslinked carboxymethyl-cellulose-polyvinyl alcohol hydrogel films for extended release of water soluble basic drugs, Journal of Drug Delivery Science and Technology 52 (2019) 421-430.##[87] R. Agarwal, M.S. Alam, B. Gupta, Polyvinyl al-cohol-polyethylene oxide-carboxymethyl cellulose membranes for drug delivery, Journal of Applied Polymer Science 129(6) (2013) 3728-3736.##[88] R.N. Oliveira, A.P.D. Moreira, R.M.d.S.M. Thiré, B. Quilty, T.M. Passos, P. Simon, M.C. Mancini, G.B. McGuinness, Absorbent polyvinyl alcohol–sodium carboxymethyl cel-lulose hydrogels for propolis delivery in wound healing applications, Polymer Engineering and Science 57(11) (2017) 1224-1233.##[89] E.A. Kamoun, E.-R.S. Kenawy, X. Chen, A review on polymeric hydrogel mem-branes for wound dressing applications: PVA-based hydrogel dressings, Journal of Advanced Research 8(3) (2017) 217-233.##[90] İ. Özen, G. Okyay, A. Ulaş, Coating of nonwovens with potassium nitrate containing carboxymethyl cellulose for efficient water and fertilizer management, Cellulose 25(2) (2018) 1527-1538.